subpolt.blogg.se

Jackery explorer 240 portable power station
Jackery explorer 240 portable power station













When the power station has something wrong with input when using the ac charger cable: If E500 can be recharged by ac charger well, it shows that there is nothing wrong with the E500 and checks if there is a problem with the solar panel. You can unplug and plug in several times to see.

jackery explorer 240 portable power station

Connect the solar panel, and make sure there is no shadow cast on the panel. If you are using another brand of solar panels to charge the E500:

  • Use a soft cloth to remove the dust and dirt on the surface.
  • Use the provided ac charger to charge to see.
  • It is highly recommended that you purchase the matching Jackery solarsaga solar panel(s) for your Jackery explorer. And they do not provide after-sale services for them. As the safety and quality of those products can’t be guaranteed. However, Jackery does not recommend other brand products to recharge your Jackery power station.
  • The plug connection size: outer diameter 7.9mm, inner diameter 5.5mm, inner needle diameter 0.9mm (empty).
  • You must match the plug size and input voltage of the Jackery power station you are trying to charge.įor example, third-party solar panels for the explorer 1000 should have the following specs: Jackery power stations can be charged with a third-party brand solar panel.
  • Connect the dc interface of solarsaga 100w with the input of explorer 500.Ĭan I use a 3 rd party solar panel to charge my Jackery?.
  • Find the dc interface on the back of solarsaga 100w.
  • Jackery recommends the best match: use one Jackery solar saga 100w solar panel to charge the E500.

    Jackery explorer 240 portable power station how to#

    How to use the saga 100w to charge the E500

    jackery explorer 240 portable power station

    Charge by car outlet through the car charging cable with the Jackery.

    jackery explorer 240 portable power station

    Charge by wall outlet through the ac charger that comes with the product.For the E1500 or higher: Panels must output 12v-51v and have the correct connection plug (8.0mm*5.5mm*2.0mm).For the E1000 and lower models: Panels must output 12v-30v and have the correct connection plug (7.9mm*5.5mm*0.9mm).There are three methods to recharge your Jackery power station:













    Jackery explorer 240 portable power station